ACW Naval status update - week 16

Week 16?  Seriously?

This plan is seriously working. Much progress was made this week. So much so that the end of the project can be visualized. But enough of that, get to the models!

What's done! 

CSS McRae and USS Miami are done and join, the fleet!

USS Miami

USS Miami quarter view. Fine model from Bay Area Yards.

But, wait, there's more!  USS Lackawanna and her sister are completed as well!

Beam shot of USS Lackawanna

Lackawanna, again.

What's in progress? 

So what's in progress? Basically what is left in the queue - USS Susquehanna, USS Kearsarge and USS Minnesota. Susquehanna is close to complete needing just a little touch up on the paint.

Nice beam view of Susquehanna.

So much wire...

Seriously, that's a lot of wire. Several feet at least.

Overhead view of Susquehanna.

 

USS Kearsarge.

USS Minnesota with  the early 1862 armament. (Plus the full gun deck under the spar deck.)

10" pivot forward with 8" guns on the spar deck. Guns are mostly from Bay Area Yards, but there are four Thoroughbred guns mixed in on deck.

What's Next? 
Get cracking on finishing this project up! Install the last of the guns, touch up the paint and get busy installing the rigging for Minnesota and Kearsarge!

ACW Naval week 15 status update

Good day and welcome to week  15!

A mixed week. More progress was made on the rigging front and less progress was made on the painting front. Good news is that week 16 is likely to be more of a painting week.

What's done?
Nothing! Absolutely nothing! Despite the plan anticipating the painting on the Miami would be finished this week, that did not happen.

What's in Progress? 
Lots! Good progress was made rigging the models. In fact, CSS McRae joins Miami in the paint queue. The two Lackawanna class sloops will done t his week, assuming that the one with the 'minimalist' rig looks okay.

CSS McRae from Bay Area Yards

McRae again.

Lackawanna with the minimalist rigging. It's easier and likely more durable for the tabletop.

But the Lackawanna with the additional rigging looks so much cooler!

The additional wires are more likely to break off during a game.

What's on deck?

Finishing up the rigging on the Susquehanna and then tackling the Kearsarge and Minnesota. First step is painting the deck guns for both models.

Susquehanna just needs the mizzen mast rigging to move to the paint queue.

Nice quarter angle showing off the amount of steel wire on the model.

The guns required to complete the Kearsarge and Minnesota models. The guns on the stick came with the Throughbred Kearsarge kit, the others are Bay Area Yards guns.

ACW Naval week 13 update

13 weeks! 

When I started the ACW Naval blog updates 13 weeks ago, the objective was to hold my feet to the fire and get the 1/600 models assembled and painted. After a quarter of a year, I can see that great progress has been made and that a fair bit of work remains. Time to take stock of the achievements and lessons learned and outline what remains to be done.

One achievement is that all the ship models have been assembled. Items that have languished in boxes since 2007 are assembled and based! Given that it was a 9 year backlog, this alone is cause for celebration. 

New models have joined the tabletop fleet and are ready for play. This includes a salvaged Sassacus model, two Patrick Henry models, USS Varuna, USS Calhoun, USS Pawnee, USS Eastport, CSS Florida, CSS Selma, the Confederate Yazoo Monster, Battery Buchanan and assorted gun batteries. Not bad work for a quarter of a year! 

Lessons learned

You don't have to do a lot of work all at once. A little work, when you can do it adds up over time. Don't feel like you can't tackle the project because you can't set aside enough time to do it all at once. Break the task into small parts and take each as time allows. It's surprising how quickly the results build up! 

Sharing the results along the way has helped improve the finished work. Knowing that someone else will view these models pushes the quality bar higher and results in a better product than just a 'table ready' model. 

Sweat the details. You'll be happier knowing you've giving the model the best effort you can muster. But don't drown in sweat - at the end of the day these are tabletop gaming models. Remember the 3 foot rule!


On to week 13 results! 

What's done...
Two models join the fleet this week - USS Pawnee and USS Calhoun. Pawnee served on the Potomac River flotilla in 1861 and remained in service for the rest of the war. 

Ready for action!

Seriously? Two wires are missing from the foremast? 

This quarter view showcases the amount of standing rigging present on the model.

USS Calhoun from Bay Area Yards.

 Calhoun has the distinction of starting service with the Confederacy before falling into Union hands. For such a small vessel, Calhoun was in the thick of the action through the war.  


What's coming along...

Work on the squadron of Union sloops continues Kearsarge moving through the paint queue while the two Lackawanna class sloops have received their armament and await touch up painting and rigging. 

 

USS Kearsarge from Throughbred Models.

USS Lackawanna from Bay Area Yards.

"Are we not the baddest sloops in the fleet, Lackawanna?"

"Yes we are Other Lackawanna. Yes we are."

 

USS Susquehanna is coming along with painting almost finished on the masts and the hull touched up after the recent red lead incident. 

 

The model in the rear is an old TCS casting of a blockade runner in "not-1/600" scale. a fellow gamer cut off the deck fittings using industrial equipment. The conversion was done way back in the day before Bay Area Yards existed and was far beyond the current range of Thoroughbred models available. Given the limitations of the model and the modlellers skill the result continues to serve in Ray's fleet filling in for whatever large sidewheeler  is required.

With the TCS model in the foreground. The masts are very simple posts. The mizzen mast was scrounged from a Throughbred Sassacus kit that as sacrificed for parts (but which was recently resurrected and refit - see earlier post)

USS Susquehanna and USS Miami.

Both models are from Bay Area Yards.

 

USS Miami is about ready to receive armament and rigging as well. 

Apparently Miami only has the single mast forward. This might be unique as I cannot point to another double ender with the same configuration.

What's in the queue...
 Finishing up the above project really leaves one big project in the queue with a couple of minor tasks to finish off the project. The big project is indeed big - Bay Area Yards USS Minnesota model. There's a bit of painting to do, then mount the formidable spar deck armament...and then the rigging.

That's A LOT OF MAST!

USS Minnesota in broadside, the masts tower over the hull.

 

ACW Naval status report - week 8

Well. Almost forgot to post an update for this week. And it's been such a great week!

Not much moved to the 'done' column this week. but lots of progress in the other areas.

What's Done?

Finished up painting the rigging on USS Varuna and got the matte coat of varnish applied.

What's almost done?

Good progress on the CSS Thomas Jefferson and CSS Patrick Henry. Both had their ordnance installed and the rigging is coming along. Finding some odds and ends to paint as this progressed. Should be done in the next week or two. (Did I mention that rigging in a pain?)

 

CSS Patrick Henry from Bay Area Yards.

CSS Thomas Jefferson with the guns mounted. Rigging is underway.

CSS Patrick Henry with the bow and stern pivots mounted. Lots of work left on the rigging.

 


What's 'In Progress'?

We had a gorgeous day on Saturday almost like early summer. Highs in the 70's, sunshine and dry air - spray painting weather! Several hulls that were ready for a primer coat got painted as did a whole mess of guns from Bay Area Yards.

CSS Calhoun. Good shot of the detail that went into this model. It's a great piece.

CSS Calhoun from Bay Area Yards.

USS Easport from Brown Water Navy Miniatures (Shapeways).

USS Kearsarge from Thoroughbred Figures.

USS Miami from Bay Area Yards.

Typical double ender. Big heavy semi-pivots mounted fore and aft.

Miami had a very different hull form than did the Sassacus or John Paul Jones class double enders.

In addition to the priming work, some general painting was done to CSS McRae and USS Lackawanna.

CSS McRae from Bay Area Yards.  Working on the block painting before starting the detail work.

The masts cleaned up nicely!