Blackhawk UP! Brown Water Navy's 3D printed gunboat model in 1/600 scale

I know, it's been a while since I've posted. Lots of projects that pull me in different directions.

Regardless, I found some motivation with a new batch of ACW ship models I acquired from Matt at Brown Water Navy. Today's focus is one of the new models, the USS Blackhawk.

A large sidewheel tinclad, Blackhawk served as Admiral Porter's flagship for the Mississippi River Squadron. Spacious, with room for Admiral Porter's horse, Blackhawk served in multiple campaigns including the Red River and Vicksburg.

For nearly 20 years my gaming needs for a Blackhawk were filled by pretty much the only game in town in 1/600 - Peter Pig. Models aimed squarely at the gaming market, The Peter Pig model cleaned up into a serviceable model with good painting and the addition of some boom and masts. Now the Pig has a competitor for this model - Brown Water Navy. You can check out the websites of the each respective products, but what really works here is pictures. So here you go...

Here's the BWN model in the forefront

and with the Peter Pig model up fron

Both compared to a Thoroughbred City class ironclad

And overhead view. You can see that there are variations between the two models is cabin length, the texas, sky lights and stack location

 More to come!

The Manassas prepares to sail...

Earlier in the year I had acquired a 1/600 scale model of the Confederate ironclad ram Manassas from Bay Area Yard. You can read about the assembly of the model here.

View down the bow showing off the covered 32 pounder and the twin funnels. 

For painting, I went with something with a little more interest than the basic black scheme that I've used for years. This time, I'm allowing the sun and salt to do their worst and let the initial coat of black paint fade to a sun-bleached gray. Only the funnels and some of the deck fittings would retain their blacker appearance.

Manassas in profile. The gray hull contrasts with the muddy brown Mississippi and the burnt black of the funnels. 

An overhead view. Debating if the hatch covers should be painted or reflect a more subdued appearance. 

Once the gloss coat dries, I'll hit it with a Matt coat and then brush on some gloss coat to return the water to a wetter finish. Then it will be time to get this model on the table and let the Yankee's feel the wrath of this fully operational ironclad! 

Assembling the Manassas, part 2

Completing the assembly of the Manassas. Cutting the stacks off the sprue and filing the ends flat was straightforward.

The mount for the stacks was a little more complex. The mount has a hole for each stack to sit in. It's a good design and it's spoiled by one thing. Either each hole contains a mounting post for the stack, or there was a bit of flash in each hole. Either way, the metal had to go. A Goldilocks trial and error process of sorting through the drill bits found one that fit without being too big or too small (a #44 for those wanting to know). Slowly and carefully I used the drill to bore out the offending metal.

With that resolved, a good thick, heavy duty CA adhesive was applied to the end of the stack and inserted into each hole. It was a little tricky as the hole was not a tight fit, but the stacks did stand up.

With that - assembly is completed.*

And here's the assembled model.

With the stacks installed! 

View from the forward port quarter.

Port broadside view.

Hmmm...what's the tiny guide hole? Uh oh - I've misaligned the stacks! 

Here the BAY model (on the right) next two the Thoroughbred Figures model on the left.  Two interpretations of the same model. 

From the images you should be able to see that the Thoroughbred model sits higher above the water than the BAY model. Both show many of the same types of details, though they vary slightly in terms of position. 

* I may come back and add the jackstaff for the flag later.

See how the painting went in part three! 

Back to Civil War Naval...

...but did I ever really leave?

Even more 1/600 models added to the backlog of ship models to be assembled, painted and brought to the gaming table.  This time, it's a batch of models from Bay Area Yards with a smattering of Thoroughbred tossed in.

First up, I've had a recurring itch to game the naval action(s) of the 1867 Haitian Civil War. It's an easy stretch goal for the ACW naval gamer as many of the ships models are all surplus US Navy vessels. The most impressive ship in the war would have been the ironclad ex-CSS Atlanta, which was purchased and on the way to intervene in the civil war when the vessel sank off the East Coast of the United States.

A challenge though is modeling two stalwart ships of the former US Navy - the Mount Vernon and the Quaker City. These side wheel steam ships were former blockaders in the American Civil War. In Salnave's War, these ships were practically battleships and key vessels in the handful of naval actions waged in the war. Unfortunately, neither ship is currently modeled in 1/600 scale. I'm hopeful that I can use these Bay Area Yards models as the basis for creating conversion that will capture the look and feel of the actual ships.

Hull of the Confederate gunboat Varuna. No upper works or fittings. But a great hull! 

Model of the French Gassendi class sloop. Another conversion candidate.

Fore and aft of the Gassendi models

Hull of  the Star of the West. Another prime conversion candidate.

The Star of the West will assorted parts mocked up for sizing.

Add caption

Hull of USS Mississippi

USS Powhatan model. On the large end of a a conversion candidate. 

Second item - a model of the USS Harvest Moon. A nice little sidewheeler that I've never added to the fleet. Helps to round out the collection.

The model is in roughly three parts. I'll need to model the stack. 

The parts stacked together.

and lastly - two nice additions: Forts Jackson and St. Phillip from the New Orleans campaign.

St. Phillip

Fort Jackson. That's a LOT of fort! 

More ships points for Anaconda...

Added a new document to the wargamevault.com website with the point values of a bunch of additional ship models that are available in 1/600 scale. Click here to connect to the product page.

For those of you that already own Anaconda - it'll save you some time doing the research. There are a number of 'what if' ships included such as Dunderberg and the Yazoo Monster.

The ACW Naval building project 2015 - 2016. The final posting.

It's done.

I've completed the assembly and painting of all the ACW naval models in my collection. If took more than half a year, but it's done.  The last two models - USS Kearsarge and USS Minnesota were stubborn. The standing rigging on Minnesota took the better part of a month. I don't want to think about how many feet of wire are on the model.

Port beam of the Minnesota from Bay Area Yards. Stripped down for combat with her boats lowered away. 

 Bow quarter view of the model. The steel wire really helps stiffen and support the masts - just like the real standing rigging! 

USS Kearsarge from Thoroughbred Models. Ready for action! 

Now I can do two things - reorganize the painting table for the next project and start playing some games using these models!

ACW Naval update - week 23

I know, you're asking yourself, "what happened to week 22?" Well, it sorta got swallowed up with a bunch of activities around Memorial Day weekend.  I spent a weekend in Houston doing assorted things.

This young man build a set of Brotherhood of Steel power armor out of cardboard and duck tape. The helmet started life as a Clone Trooper. Nice representation of a laser rifle too!

And the Fallout references continue with this absolutely sick 1:1 model of Mr. Handy.

What's this? The entrance to a Vault-TecVault? Nope! It's a armored door onboard USS Texas, a battleship commissioned in 1914.

Are you sure it's not a Vault? Yes! This is a connecting passagway on the second deck (under the main deck).

Casemate battery on the main deck. These 5" mounts represent gunnery 55 years after the Civil War. While the optics and recoil mechanisms have improved and the gunports are huge, it's still gives you the feel of what the gun deck on a casemate ironclad must have been like.

Work continues - rigging on the Minnesota is almost done. While I missed the end of May deadline, Minnesota shall be complete before mid-June.

Work is focused on the mizzen mast standing rigging. That and a few load bearing lines for the mizen boom and spar and it'll be completed!

The addition of the standing rigging really transforms the size of the model.

While I've been procrastinating with the Minnesota's rigging, I've made progress with prepping and decaling a Shapeways 1/144 model - a little seen Fokker D VI. It's a composite of the engine and fuselage of the Dr. I and the wing design from the D. VII. It was a produced in small numbers serving in both the German and Austro-Hungarian air services. 

 Slow progress here. Need to repaint the engine cowling.

Still need to decal the stabilzers and control surfaces.

It's very glossy right now as it's still under construction. Once decaled, the last thing it gets is a matte finish to dull down the shine.

ACW Naval update - week 21

No update last week for multiple reasons. This week has some good progress.

USS Kearsarge has the rigging installed.

Last task here is to paint the rigging and call it a day...


USS Minnesota - work continues on the rigging. As indicated earlier, this thing is a beast. About 2/3 done with a little bit of the main mast and the the mizzen mast rigging remaining.

Trying to finish this in the next two weeks.

ACW Naval status update - week 19

Work continues on the USS Minnesota and USS Kearsarge models. The Kearsarge had the duffel bags along the railings painted and the stays and back stays for the foremast are installed.

Work continues on rigging the foremast of USS Minnesota.

Port quarter view of USS Kearsarge

Kearsarge, again

USS Minnesota from the starboard beam. The stays are installed for the foremast working on the back stays.

The lower back stays are installed. Still need the middle and upper back stays.

It's eating up a lot of wire!

This is hard, fiddly work. The glue won't always keep the wire in place. During a game it may start shedding wire on the table.