CSS Polk from Brown Water Navy

Another model that was recently added to my collection was the Confederate protected gunboat "General Polk" done by Brown Water Navy.  Contrary to most of the gaming models of Confederate gunboats, the Polk is massive. The depiction of this large model is based on research done by John W. Wallis and published in his work "IRONCLAD AND IRON PROTECTED VESSELS OF THE CONFEDERATE STATES NAVY". It's a great read that reflects the years of research John has invested in the period as well as the amount of new material that has come to light in the last twenty old years.

Let's take a quick look at the Polk...

Here is the model, unbased and unpainted. The grid is in inches.
The low pilot house matches Wallis's depiction. Guns are mounted in the casemate.

Here the Polk is paired with a Bay Area Yards model of the Lioness

Overhead shot with the Lioness

A Thoroughbred tinclad joins the lineup

A Thoroughbred model of the USS Benton for some size comparison.

For contrast the Genreal Polk paired with the USS Layfayette. Both models are Brown Water Navy.

Assembling the Manassas, part 2

Completing the assembly of the Manassas. Cutting the stacks off the sprue and filing the ends flat was straightforward.

The mount for the stacks was a little more complex. The mount has a hole for each stack to sit in. It's a good design and it's spoiled by one thing. Either each hole contains a mounting post for the stack, or there was a bit of flash in each hole. Either way, the metal had to go. A Goldilocks trial and error process of sorting through the drill bits found one that fit without being too big or too small (a #44 for those wanting to know). Slowly and carefully I used the drill to bore out the offending metal.

With that resolved, a good thick, heavy duty CA adhesive was applied to the end of the stack and inserted into each hole. It was a little tricky as the hole was not a tight fit, but the stacks did stand up.

With that - assembly is completed.*

And here's the assembled model.

With the stacks installed! 

View from the forward port quarter.

Port broadside view.

Hmmm...what's the tiny guide hole? Uh oh - I've misaligned the stacks! 

Here the BAY model (on the right) next two the Thoroughbred Figures model on the left.  Two interpretations of the same model. 

From the images you should be able to see that the Thoroughbred model sits higher above the water than the BAY model. Both show many of the same types of details, though they vary slightly in terms of position. 

* I may come back and add the jackstaff for the flag later.

See how the painting went in part three! 

Assembling the CSS Manassas - 1/600 model from Bay Area Yards

In February of 2017 I acquired a model of the Confederate ironclad CSS Manassas. Oft remembered as the Confederacy's first ironclad, she was slow and poorly armed. If it was not for the fact her opposition was entirely wooden ships, Manassas would have been found seriously wanting as a warship.

Manassas had a short, but busy career engaging Union ships at the Head of Passes, making the journey north to briefly join the River Defense Fleet near Memphis before returning to New Orleans and participating in her final battle against the Union navy at Fort Jackson as Farragut ran the guns.

This project is a 1/600 scale model of Manassas from Bay Area Yards. (Kit # HCS-024). As 1/600 models go, this one is straightforward with a minimal number of of parts. One (1) hull casting and one (1) sprue of stacks and fittings.

Manassas straight out of the bag. 

The historical record concerning Mansassas is conflicted with some sources indicating that the ship had one or two smokestacks. Some theories hold it was two stacks, then one following a refit after the engagement at the Head of Passes. The model offers the option to build either of the stack variants. As I already have a Manassas with one stack, I elected to model this kit as the early two-stack version suitable for the Head of Passes battle.

The hull casting needed a little clean up around the edges. Most of the work is for the sprue casting at the aft end of the model with required a bit of cutting. After that it was very minor filing to smooth the edges and make the bottom of the casting flush.

A little scraping along the starboard waterline is causing the hull to look odd. 

Sprue with flash.

Sprue with flash removed from the short midships steam pipe. 

Basic assembly is easy. I based the hull of the model on a thin piece of styrene. As usual, I used Woodland Scenics Flexpaste as the adhesive to attach the model.

The hull with the base for the two smokestacks installed.

And an overhead view.

With the hull attached to the base with the Flexpaste. The midships steam pipe is installed. 

Starboard quarter view of the model.

Next steps are to install the stacks and get a coat of primer on the model!

Assembly continues on part 2.

Back to Civil War Naval...

...but did I ever really leave?

Even more 1/600 models added to the backlog of ship models to be assembled, painted and brought to the gaming table.  This time, it's a batch of models from Bay Area Yards with a smattering of Thoroughbred tossed in.

First up, I've had a recurring itch to game the naval action(s) of the 1867 Haitian Civil War. It's an easy stretch goal for the ACW naval gamer as many of the ships models are all surplus US Navy vessels. The most impressive ship in the war would have been the ironclad ex-CSS Atlanta, which was purchased and on the way to intervene in the civil war when the vessel sank off the East Coast of the United States.

A challenge though is modeling two stalwart ships of the former US Navy - the Mount Vernon and the Quaker City. These side wheel steam ships were former blockaders in the American Civil War. In Salnave's War, these ships were practically battleships and key vessels in the handful of naval actions waged in the war. Unfortunately, neither ship is currently modeled in 1/600 scale. I'm hopeful that I can use these Bay Area Yards models as the basis for creating conversion that will capture the look and feel of the actual ships.

Hull of the Confederate gunboat Varuna. No upper works or fittings. But a great hull! 

Model of the French Gassendi class sloop. Another conversion candidate.

Fore and aft of the Gassendi models

Hull of  the Star of the West. Another prime conversion candidate.

The Star of the West will assorted parts mocked up for sizing.

Add caption

Hull of USS Mississippi

USS Powhatan model. On the large end of a a conversion candidate. 

Second item - a model of the USS Harvest Moon. A nice little sidewheeler that I've never added to the fleet. Helps to round out the collection.

The model is in roughly three parts. I'll need to model the stack. 

The parts stacked together.

and lastly - two nice additions: Forts Jackson and St. Phillip from the New Orleans campaign.

St. Phillip

Fort Jackson. That's a LOT of fort! 

Anaconda: River of Blood - the Red River campaign expansion for Anaconda

New to Wargame Vault is Anaconda: River of Blood, a supplement to the original Anaconda rules.

Designed to generate tabletop miniature games simulating naval naval battles during the ill-fated Red River campaign.  This supplement includes an order of battle for both sides, a strategic map of the Red River that replaces the original strategic map of the Red River, tactical maps defining sections of the Red River and special rules modifications to the core Anaconda game designed to replicate the  events of the original campaign.  

What's new here?

- The strategic map of the Red River is expanded. The original game didn't really focus on operations on the Red River, mostly as the campaign was pretty much over by that point in the war. 

-  Tactical maps are included for each of the strategic Area boxes. None of these tactical maps were included in the original rules. 

- Starting order of battle for the Red River campaign listing the ships and fortifications present at the start of operations. This gives you a historcal starting point for the game and an good plan for what ships you should field.

- Special rules for giving the Red River the historical character that made it unique.  

So break out those late-war Union ironclads, raise steam and ascend the River of Blood...if you dare! 

Anaconda: Capital Navies released on Wargame Vault

It's been a long time coming, but Anaconda: Capital Navies is available for sale via Wargame Vault.

The cover of Anaconda: Capital Navies

The focus of Capital Navies are the "Virginia naval campaigns" - the Chesapeake, Potomac and James Rivers.

Capital Navies includes two short campaigns, a long campaign covering the whole war and maps designed to aid in setting up the tabletop battlefields for your games.

ACW Naval - Just when I thought I was out, they pull me back in.

Earlier in 2016 I finished building and painting my back log of 1:600 scale American Civil War naval models. What an accomplishment! I was able to move forward and wrap up the 1;144 WWI airplane project and begin focusing on the 25mm Sikh War project.

And then, that quote from the Godfather III pops up.

While at Fall In 2016 in November, I found two 1:600 Ellet Ram models in the flea market. Okay, great - I could use more rams.

A Thoroughbred Miniatures ram, but with different stacks than the stock kit. Still a good gaming model. 

And a stock Ellet ram, with a good primer coat laid down. 

And then a few weeks ago, a friend gifted me with his unpainted, mint in box collection of 1:600 Thoroughbred Figures kits.

Huzzah! A third Ellet Ram! 

Another one!

You always need more tugs and barges! 

Another Sassacus class double ender! 

Again? Guess we'll have to reinforce the Carolina coastal squadron. 

Back to the Mississippi! 

And just like that, I've got a backlog of ACW models to work through again. It's a good thing there were 28 ships in the Sassacus class, because at this rate, I may end up with all of the them!

More ships points for Anaconda...

Added a new document to the wargamevault.com website with the point values of a bunch of additional ship models that are available in 1/600 scale. Click here to connect to the product page.

For those of you that already own Anaconda - it'll save you some time doing the research. There are a number of 'what if' ships included such as Dunderberg and the Yazoo Monster.

The ACW Naval building project 2015 - 2016. The final posting.

It's done.

I've completed the assembly and painting of all the ACW naval models in my collection. If took more than half a year, but it's done.  The last two models - USS Kearsarge and USS Minnesota were stubborn. The standing rigging on Minnesota took the better part of a month. I don't want to think about how many feet of wire are on the model.

Port beam of the Minnesota from Bay Area Yards. Stripped down for combat with her boats lowered away. 

 Bow quarter view of the model. The steel wire really helps stiffen and support the masts - just like the real standing rigging! 

USS Kearsarge from Thoroughbred Models. Ready for action! 

Now I can do two things - reorganize the painting table for the next project and start playing some games using these models!